2NC/2NF/2NG/2NN/3P7/3P8/3P9-1
1-5-33
21. Remove four screws.
22. Remove upward the laser scanner unit
during leaning it.
*: Be careful of the appearance which hits
against a frame etc. and does not give a
shock to LSU (polygon motor) at the time
of attachment and detachment of LSU.
23. Check or replace the laser scanner unit
and refit all the removed parts.
*: When refitting the laser scanner unit, be
sure to insert the developer unit after
attaching the container rail.
Figure 1-5-56
Screw
Screw
Screw
Screw
Laser scanner unit
To Next Page
Loading...
