2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-102
4. Remove the spring using the longnose
pliers from the attachment hole in PF
paper feed holder and the top PF paper
feed assembly.
Figure 1-5-178
5. Lift the paper feed holder and then
rotate it.
6. Remove the paper feed holder by pull-
ing out from the paper feed roller shaft.
7. Check or replace the paper feed holder
and refit all the removed parts.
Figure 1-5-179
Longnose pliers
Spring hook
Attachment hole
in PF paper feed holder
Top PF paper feed assembly
Top PF paper feed assembly
Paper feed
roller shaft
Paper feed
holder
To Next Page
Loading...
