Kyocera Ecosys M6526cdn Operation Guide

Default Setting (System Menu)
8-186
4 Press the OK key. The Network Setting menu
appears.
5 Press the  or  key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the  or  key to select [SSL].
8 Press the OK key. SSL appears.
9 Press the  or  key to select [On] or [Off].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
IPP Security
Specify the protocol to be used for IPP. The default setting is IPP/IPP over SSL .
Use the procedure below to make the setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the
OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
Network Setting: a b
*********************
6 Host Name
7 LAN Interface
[ Exit ]
5 Secure Protocol
Secure Protocol: a b
*********************
2 IPP Security
3 HTTP Security
[ Exit ]
1 SSL
SSL: a b
1 Off
*********************
2 *On
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]

Kyocera Ecosys M6526cdn Specifications

General

Brand	Kyocera
Model	Ecosys M6526cdn
Category	All in One Printer
Language	English