Kyocera Ecosys M6526cdn Operation Guide

Preparation before Use
2-21
2
IMPORTANT: When the DHCP Setting (page 2-15) is
[On], the current IP address is displayed and cannot be
changed.
When setting an IP address, set the DHCP Setting
(page 2-15) to Off.
21 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
22 Press the  or  key to select [Subnet Mask].
23 Press the OK key. Subnet Mask appears.
24 Use the arrow keys to enter the Subnet Mask.
Press the  or  key to move the cursor position
horizontally.
Press the  or  key or the numeric keys to enter
the Subnet Mask. Each 3 digits can be set between
000 and 255.
IMPORTANT: When the DHCP Setting (page 2-15) is
[On], the current Subnet Mask is displayed and cannot
be changed.
When setting an Subnet Mask, set the DHCP Setting
(page 2-15) to Off.
25 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
26 Press the  or  key to select [Default Gateway].
IP Address: b
123.145.167.189
IPv4 Setting: a b
*********************
2 Auto-IP
3 IP Address
[ Exit ]
1 DHCP
Subnet Mask: a b
123.145.167.
189
IPv4 Setting: a b
*********************
2 Auto-IP
3 IP Address
[ Exit ]
1 DHCP

Kyocera Ecosys M6526cdn Specifications

General

Brand	Kyocera
Model	Ecosys M6526cdn
Category	All in One Printer
Language	English