Preparation before Use
2-22
27
Press the OK key. Default Gateway appears.
28
Use the arrow keys to enter the Default Gateway.
Press the ļ¶ or ļ· key to move the cursor position
horizontally.
Press the ļ² or ļ³ key or the numeric keys to enter
the Default Gateway. Each 3 digits can be set
between 000 and 255.
IMPORTANT: When the DHCP Setting (page 2-15) is
[On], the current Default Gateway is displayed and
cannot be changed.
When setting an Default Gateway, set the DHCP
Setting (page 2-15) to Off.
29
Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
To Next Page
Loading...
Need help?
General
