S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read “Installation Guidelines” on page 185 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku: https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1. Prepare your server.
a. Remove the top cover. See “Remove the top cover” on page 376.
b. If there is a RAID super capacitor module installed on the air baffle, disconnect the RAID super
capacitor module cable first.
c. If there is a GPU installed on the air baffle, remove the GPU first. See “Remove a GPU adapter”
on page 215.
Step 2. Grasp the air baffle and carefully lift it out of the server.
Note: The illustrated air baffle is the standard air baffle. The removal procedure is the same for the
GPU air baffle. For more information, see “Remove a GPU adapter” on page 215.
Figure 148. Air baffle removal
Chapter 4. Hardware replacement procedures 197
To Next Page
Loading...
