Troubleshooting by symptom
Use this information to find solutions to problems that have identifiable symptoms.
To use the symptom-based troubleshooting information in this section, complete the following steps:
1. Check the event log of Lenovo XClarity Controller and follow the suggested actions to resolve any event
codes.
For more information about event logs, see “Event logs” on page 383)
2. Review this section to find the symptoms that you are experiencing and follow the suggested actions to
resolve the issue.
3. If the problem persists, contact support (see “Contacting Support” on page 419).
Chapter 5. Problem determination 389
To Next Page
Loading...
