External LCD diagnostics handset
The external LCD diagnostics handset is an external device that can be connected to the server with a cable,
and it allows quick access to system information such as errors, system status, firmware, network, and
health information.
Note: The external LCD diagnostics handset is an optional part that needs to be purchased separately.
• “Location of the external LCD diagnostics handset” on page 37
• “LCD diagnostics panel overview” on page 38
• “Options flow diagram” on page 39
• “Full menu list” on page 41
Location of the external LCD diagnostics handset
Location
Description
The external LCD diagnostics handset is connected to the
server with an external cable.
1 External LCD diagnostics handset
2 Magnetic bottom
With this component, the diagnostic handset can be
attached to the top or side of the rack with hands spared
for service tasks.
3 External diagnostics connector
This connector is located on the front of the server and is
used to connect an external LCD diagnostics handset.
Note: Pay attention to the following steps when unplugging the external handset:
Chapter 2. Server components 37
To Next Page
Loading...
