Front IO assembly
The front IO assembly provides controls, connectors, and LEDs. The front I/O assembly varies by model.
Figure 5. Front IO assembly (on rack latch) Figure 6. Front IO assembly (on media bay)
Note: The LCD diagnostic panel 7 on media bay provides an LCD display to quickly access system
information such as active errors, system status, firmware information, network information, and health
information. For details, see “LCD diagnostics panel” on page 29.
Table 13. Components on the front I/O assembly
Callout Callout
1 USB 3 (5 Gbps) connector 2 USB 2.0 connector with XClarity Controller
management
3 Power button with power status LED
4 Network activity LED (for OCP 3.0 Ethernet adapter)
5 System ID button with system ID LED 6 System error LED
1 USB 3 (5 Gbps) connector
The USB 3.2 Gen 1 (5 Gbps) connector can be used to attach a USB-compatible device, such as a USB
keyboard, USB mouse, or USB storage device.
Chapter 2. Server components 27
To Next Page
Loading...
