Install the security bezel
Use this information to install the security bezel.
About this task
Attention:
• Read “Installation Guidelines” on page 185 to ensure that you work safely.
• Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku: https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1. If you have removed the rack latches, reinstall them. See “Install the rack latches” on page 309.
Step 2. If the key is held inside the security bezel, remove it out of the security bezel.
Figure 285. Key removal
352 ThinkSystem SR650 V2Maintenance Manual
To Next Page
Loading...
