a. Loosen the screw that secures the riser assembly.
b. If you are removing a full-length GPU adapter, open the blue latch on the GPU air baffle.
c. Grasp the riser assembly by its edges and carefully lift it straight up and off the chassis.
Step 4. Disconnect the power cable from the GPU adapter.
Step 5. Remove the GPU adapter from the riser bracket.
Figure 165. Removing the GPU adapter
a. Rotate the GPU adapter retention latch to the open position.
b. Grasp the GPU adapter by its edges and carefully pull it out of the PCIe slot.
After you finish
If you are instructed to return the defective component, follow all packaging instructions and use any
packaging materials that are provided.
Chapter 4. Hardware replacement procedures 217
To Next Page
Loading...
