• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku: https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1. Touch the static-protective package that contains the new intrusion switch to any unpainted
surface on the outside of the server. Then, take the new intrusion switch out of the package and
place them on a static-protective surface.
Step 2. Rotate the fan cage by 90 degrees in the direction shown in the picture.
Step 3. Install the intrusion switch onto the fan cage.
242 ThinkSystem SR650 V2Maintenance Manual
To Next Page
Loading...
