Lenovo ThinkSystem SR650 V2 - Page 288

About this task
CAUTION:
Power off the server and disconnect all power cords from their power sources before performing this
procedure.
Attention:
• Read “Installation Guidelines” on page 185 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku: https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1. Remove the OCP 3.0 Ethernet adapter.
Figure 206. OCP 3.0 Ethernet adapter removal
a. Loosen the thumbscrew that secures the card.
b. Pull out the OCP 3.0 Ethernet adapter.
278
ThinkSystem SR650 V2Maintenance Manual