Front view with 2.5-inch front drive bays (backplane-less)
The following illustration shows the front view of server models with 2.5-inch front drive bays (backplane-
less).
Table 9. Components on the front of server models
Callout Callout
1 “External diagnostics connector” on page 37
2 “VGA connector (optional)” on page 51
3 Drive bay fillers(3) 4 “Front I/O assembly (on rack latch)” on page 27
5 Rack latch (right)
6 “Pull-out information tab” on page 1
7 Rack latch (left)
Chapter 2. Server components 23
To Next Page
