Figure 456. SAS/SATA cable routing
Figure 457. NVMe cable routing
From To From To
1 Backplane 1: SAS 0,
SAS 1
16i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 1: NVMe 8-9
Onboard: PCIe 2
2
• Backplane 1: SAS 2
• Backplane 4: SAS
• Gen 4: C1
• Gen 3: C2C3
2 Backplane 1: NVMe 10-
11
Onboard: PCIe 1
Front backplane: 8 SAS/SATA + 4 NVMe
This topic provides cable routing information for the configuration with 8 SAS/SATA + 4 NVMe front drive
bays using the 12 x 3.5-inch AnyBay front backplane.
•
“Onboard connectors” on page 435
• “8i RAID/HBA adapter” on page 436
Onboard connectors
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 435
To Next Page
Loading...
