Configuration
8200SHB0199
7-1
7 Configuration
- The configuration of the controller is used to adapt the drive to your
applications.
- For this, you have the following functions available:
- Operating functions
- Control functions
- Display functions
- Monitoring functions
- The possible settings for the functions are organised in codes:
- Codes are numerically sorted, starting from the code with the smallest
number to the one with the highest number. All codes start with a ”C”.
- They are listed in the code table.
- Each codes provides parameters, which can be used to adjust and
optimise your drive.
- The configuration of the controller can be entered by means of the keypad
of the 8201BB operating module or by means of a fieldbus via the serial
interface.
- The operating module and fieldbus modules are available as accessories.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
