Lenze 8200 - 7.5.11.6 Setpoint Sum

Configuration
8200SHB0199
7-47
7.5.11.6 Setpoint sum
Only “HVAC” controllers
Code Name Possible settings IMPORTANT
C
o
d
e
N
a
m
e
Lenze Choice Info
I
M
P
O
R
T
A
N
T
C049* Additional setpoint -480.00 {0.02 Hz} 480.00 Display only
Function In controlled operation(C005 = -1-, -2-) the setpoint sum can be generated with
- the signal of the analog input (terminal 8) or
- the digital frequency at terminal E1 or
- the function “Motor potentiometer” or
- the process setpoint C046 (LECOM).
The additional setpoint is indicated under C049.
Special features The display value of the parameter can be related to anapplicationdatum (C500, C501).
(see chapter 7.6.3)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com