Installation
8200SHB0199
4-1
4 Installation
4.1 Mechanical installation
4.1.1 Important notes
- Use the controllers only as built-in devices!
- If the cooling air contains pollutants (dust, fluff, grease, aggressive gases):
- Take suitable preventive measures, e.g. separate air duct, installation of
filters, regular cleaning, etc.
- Ensure free space!
- You can install several controllers next to each other without free space
in a control cabinet.
- Ensure unimpeded ventilation of cooling air and outlet of exhaust air!
- Allow a free space of 100 mm at the top and at the bottom.
- Do not exceed the ambient temperature permitted during operation
(see chapter 3.3).
- With continuous oscillations or vibrations:
- Check the use of shock absorbers.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
