Maintenance
8200SHB0199
9-1
9 Maintenance
9.1 Maintenance services
- The controller is free of maintenance, if the prescribed conditions are
observed (see chapter 3.3).
- If the ambient air is polluted, the air vents of the controller may be
obstructed.
- Check the air vents periodically (depending on the degree of pollution
approx. every 4 weeks).
- Free the obstructed air vents using a vacuum cleaner.
Stop!
Do not use sharp or pointed tools, such as knives or screwdrivers, to clean the air
vents.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
