Preface and general information
8200SHB01991-6
EC Declaration of Conformity ’95
for the purpose of the EC Low-Voltage Directive (73/23/EEC)
amended by: CE Mark Directive (93/68/EEC)
820X/821X/822X/824X controllers are developed, designed, and manufactured
in compliance with the above mentioned EC Directive under the sole responsibility
of
Lenze GmbH & Co KG, Postfach 10 13 52, D-31763 Hameln
Standards considered:
Standard
DIN VDE 0160 5.88 +A1 / 4.89 +A2 /10.88
DIN EN50178
Classification VDE 0160 / 11.94
Electronic equipment for use in electrical power
installations
DIN VDE 0100 Standards for the installation of power installations
EN 60529 IP degrees of protection
IEC 249 / 1 10/86, IEC 249 / 2-15 / 12/89 Base material for printed circuits
IEC 326 / 1 10/90, EN60097 / 9.93 Printed circuits, printed boards
DIN VDE 0110 /1-2 /1/89 /20/ 8/90 Creepace distances and clearances
Hameln, 01 October, 1995
________________
(i.V.Loy)
Product Manager
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
