Lenze 8200 - Page 78

Installation
8200SHB01994-20
Wall mounting of Lenze convection coolers
1. Use the 8 fixing screws M5 x 20 to screw the convection cooler onto the
cold plate.
- The fixing screws are included in the delivery package of the convection
cooler.
- For other screws observe the insertion depth t in the cold plate:
8mm$ t $ 10 mm
- Tightening torque: 3.4 Nm.
2. Fix the unit at the wall by screwing the 4 screws (max. diameter 8 mm)
through the bores provided.
Typ Id.-NR Fert.-Nr Serien-Nr. Eingang1 Eingang2
Lenze
Postfach 101352 ,31763 HAMELN
a
b
d
f
e
c
g
3)
max. 75 °C
FIG 4-12 Dimensions 821X-V003: Wall mounting of Lenze convection coolers
3) With of attachable fieldbus or I/O modules:
Observe the assembly depth and the space required for connection cables.
[mm]
a b c d e
3)
f g
8215-V003 300 400 230 320 138 83 9
8216-V003 300 500 230 320 138 83 9
8217-V003 300 600 230 320 138 83 9
8218-V003 300 750 230 320 138 83 9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com