Lenze i950

Address Name / seng range / [default seng] Info
0x5050:111 Status signals limiter
0x00000000 ... [0x00000000] ... 0xFFFFFFFF
Bit 1 SS1 acve A quick stop with subsequent inverter disable has been requested.
Bit 2 SS2 acve A quick stop has been requested.
Bit 3 SLS1 acve The "safe
operaonal stop (SOS)" funcon is acve. The safe operang
stop is monitored. The funcon becomes acve aer the "Safe stop 2
(SS2)" funcon has been executed.
Bit 4 SLS2 acve Request limited speed 1. The traversing prole is changed according to
the parameters set for limited speed 1.
Bit 5 SLS3 acve Request limited speed 2. The traversing prole is changed according to
the parameters set for limited speed 1.
Bit 6 SLS4 acve Request limited speed 3. The traversing prole is changed according to
the parameters set for limited speed 1.
Bit 7 SDpos acve Request limited speed 4. The traversing prole is changed according to
the parameters set for limited speed 1.
Bit 8 SDneg acve Only permit a posive direcon of rotaon.
Bit 9 Emergency stop acve Only permit a negave direcon of rotaon.
Bit 10 SLI acve The "safely limited increment (SLI)" funcon is acve.
Note: This funcon is not supported in this technology applicaon!
Bit 11 Operaon modes selector (OMS) acve The emergency stop funcon (OMS) is acve.
Bit 12
Bit 13
Bit 16 SOS acve The emergency stop funcon (SOS) is acve.
Bit 23 SSE acve The emergency stop funcon (SSE) is acve.
0x5050:112 Actual velocity (status word 3)
-214748.3648 ... [0.0000] ... 214748.3647
0x5050:113 Actual posion (status word 4)
-214748.3648 ... [0.0000] ... 214748.3647
0x5050:114 Error code (status word 5)
0 ... [0] ... 4294967295
0x5050:115 Actual diameter (status word 6)
-214748.3648 ... [0.0000] ... 214748.3647 mm
0x5050:116 Display value 1
0 ... [0] ... 4294967295
0x5050:117 Display value 2
0 ... [0] ... 4294967295
Conguring the "Winder Dancer" TA
In
terface
Status signals
110