9400 regenerative power supply module | Parameter setting
About this documentation
Conventions used
10 L EDS94ARNExxxx EN 2.3 - 06/2014
1.1 Conventions used
This documentation uses the following conventions to distinguish between different types
of information:
1.2 Terminology used
Type of information Writing Examples/notes
Numbers
Decimal separator Point Generally the decimal point is used.
For example: 1234.56
Text
Program name » « The Lenze PC software »Engineer«...
Window Italics The Message window... / The Options dialog box...
Variable identifier By setting bEnable to TRUE...
Control element Bold The OK button... / The Copy command... / The
Properties tab...
Sequence of menu
commands
If the execution of a function requires several
commands, the individual commands are separated
by an arrow: Select File
Open to...
Shortcut <Bold> Use <F1> to open the online Help.
If a command requires a combination of keys, a "+" is
placed between the key symbols:
Use <Shift>+<ESC> to...
Hyperlink Underlined
A hyperlink is an optically highlighted reference
which is activated with a mouse click.
Symbols
Page reference ( 10) Optically highlighted reference to another page. Is
activated via mouse-click in this online
documentation.
Step-by-step instructions
Step-by-step instructions are indicated by a
pictograph.
Term Meaning
»Engineer« Lenze software which supports you throughout the whole machine life cycle -
from planning to maintenance.
Code "Container" for one or several parameters used for parameter setting or
monitoring of the regenerative power supply module.
Subcode If a code contains several parameters, the individual parameters are stored
under "subcodes".
This documentation uses a slash "/" as a separator between code and subcode
(e.g. "C00118/3").
To Next Page
Loading...
