Lenze L-force 9400 Series Software Manual

EDS94ARNExxxx EN 2.3 - 06/2014 L 51
9400 regenerative power supply module | Parameter setting
Device interface
Device commands
4.1.12 Delete program
The device command C00002
= "34: Delete program" serves to delete the application
program in the regenerative power supply module and reset the regenerative power
supply module to its original state.
 All variables are reset to their initialisation values.
Possible status displays for this device command
Related device commands
Reset program
( 50)
Restart program
( 52)
Status (C00003) Meaning
2262274 Device command in process
2228224 Device command executed successfully
2228225 General fault

Lenze L-force 9400 Series Specifications

General

Brand	Lenze
Model	L-force 9400 Series
Category	Servo Drives
Language	English