EDS94ARNExxxx EN 2.3 - 06/2014 L 197
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Monitoring
8.5.1 Setting the error response
When a monitoring function is actuated, the response set for this monitoring function
(fault, trouble, warning, etc.) will be activated.
For many monitoring functions the response can be parameterised individually via
parameters.
Tip!
The table in the chapter "Short overview (A-Z)
" contains the error messages for
which a response can be set.
( 203)
8.5.2 Warning thresholds
Some of the monitoring functions respond if a defined warning threshold (e.g.
temperature) has been exceeded.
The corresponding preset threshold values can be changed via the following
parameters:
Parameter Information
C00121
Filter temp. warning threshold
C00122
Heatsink temp. warn. threshold
C00123
Warning threshold device util.
C00126
CPU temp. warning threshold
To Next Page
Loading...
