9400 regenerative power supply module | Parameter setting
Device interface
Device commands
58 L EDS94ARNExxxx EN 2.3 - 06/2014
4.1.18 Reset max DC power mot.
This function is available from software version V2.0 onwards!
The C00002
= "60: Reset max DC power mot." device command serves to reset the value
displayed in C00143/1
to zero. At the same time, the time stamp corresponding to this
display value (C00144/1
) is set to the current state of the elapsed-hour meter (= time of
reset). Display of peak power
( 87)
Possible status displays for this device command
Related device commands
Reset max DC power reg.
( 59)
Reset max. line power reg.
( 60)
Status (C00003) Meaning
3966210 Device command in process
3932160 Device command executed successfully
3932161 General fault
To Next Page
Loading...
