EDS94ARNExxxx EN 2.3 - 06/2014 L 9
9400 regenerative power supply module | Parameter setting
About this documentation
1 About this documentation
This documentation contains information about the regenerative power supply module.
Target group
This documentation is directed at all persons who parameterise and diagnose the
regenerative power supply module by means of the L-force »Engineer« software and the
keypad.
Information on the validity
The information provided in this documentation is valid for the following standard
devices:
Document history
Please read the Mounting Instructions supplied with the regenerative power
supply module before you start working!
The Mounting Instructions contain safety information which must be observed!
Product series Type designation From software version
Servo Drives 9400 E94AxRNxxxx 1.0
Version Description
2.3 06/2014 TD05 Error corrections
2.2 03/2010 TD05 Error corrections
2.1 01/2009 TD05 Error corrections
2.0 11/2008 TD05 • Extended by new functions for regenerative power supply module V2
•New main chapter: "CAN on board" system bus
1.1 07/2008 TD05 Error corrections
1.0 04/2008 TD05 First edition
To Next Page
Loading...
Need help?
General
