EDS94ARNExxxx EN 2.3 - 06/2014 L 61
9400 regenerative power supply module | Parameter setting
Device interface
Device commands
4.1.21 Reset transmitted energy
This function is available from software version V2.0 onwards!
The C00002
= "65: Reset transmitted energy" device command serves to reset the value
displayed in C00145/1
to zero.
Display of output and regenerated energy
( 88)
Possible status displays for this device command
Related device commands
Reset regenerated energy
( 62)
Status (C00003) Meaning
4293890 Device command in process
4259840 Device command executed successfully
4259841 General fault
To Next Page
Loading...
