Lenze L-force 9400 Series

9400 regenerative power supply module | Parameter setting
Commissioning
12 L EDS94ARNExxxx EN 2.3 - 06/2014
2 Commissioning
This chapter describes three different commissioning scenarios:
A. Short setup
( 13)
– Target: Adapting the regenerative power supply module to the electromechanics
and the control system.
B. Device replacement
( 20)
– Target: Replacing a regenerative power supply module which has failed in a running
system by a replacement device using the "old" memory module.
C. Filter replacement
( 20)
– Target: Replacing a filter which has failed in a running system.