9400 regenerative power supply module | Parameter setting
Device interface
Device commands
46 L EDS94ARNExxxx EN 2.3 - 06/2014
4.1.7 Delete logbook
The C00002
= "20: Delete logbook" device command serves to delete all entries in the
logbook.
Tip!
To display the logbook in the »Engineer«, click the Logbook button on the
Diagnostics tab.
You can also delete all entries in the logbook by clicking the Delete button in the
Logbook dialog box.
Further information on the logbook can be found in the chapter "Diagnostics &
fault analysis". ( 187)
Possible status displays for this device command
Related device commands
Archive log file
( 47)
Status (C00003) Meaning
1344770 Device command in process
1310720 Device command executed successfully
1310721 General fault
To Next Page
Loading...
