9400 regenerative power supply module | Parameter setting
Device interface
Device commands
66 L EDS94ARNExxxx EN 2.3 - 06/2014
4.1.26 CAN module: Pred.Connect.Set
The C00002
= "94: CAN module: Pred.Connect.Set" device command serves to set the basic
identifiers for the CANopen system bus interface of a CANopen communication module
inserted in module slot MXI1 or MXI2 according to the "Predefined Connection Set"
(DS301V402).
Tip!
Detailed information on the CANopen communication module (E94AYCCA) can be
found in the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
CAN module: Reset node
( 64)
CAN module: Identify node
( 68)
Status (C00003) Meaning
6194434 Device command in process
6160384 Device command executed successfully
6160385 General fault
To Next Page
Loading...
