Lenze L-force 9400 Series Software Manual

9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
198 L EDS94ARNExxxx EN 2.3 - 06/2014
8.6 Error messages
This chapter describes all error messages of the regenerative power supply module and
possible causes & remedies.
 Tip!
The error messages are also stored in the logbook in chronological order.
Logbook
( 192)
8.6.1 Structure of the error number (bit coding)
If an error occurs in the regenerative power supply module, a 32-bit value will be stored in
decimal format in the internal error buffer (C00168
), containing the following information:
[8-4] Structure of the error number
 Response
 Instance ID
 Module ID
 Error ID
210 3
Bit 31 1625262829 015

Lenze L-force 9400 Series Specifications

General

Brand	Lenze
Model	L-force 9400 Series
Category	Servo Drives
Language	English