2-48 Service Manual
5055-01X
37 Insufficient
Defrag Memory
The printer cannot
defragment flash memory.
• Delete fonts, macros,
and other data in printer
memory.
• Install additional printer
memory.
37 Insufficient
Memory
The printer memory is full and
cannot continue processing
current jobs.
• Press Go to clear the
message and continue
printing.
• Press Stop to clear the
message without
deleting print jobs.
• Press Menu to open the
Job Menu and cancel
the current job.
38 Memory Full The printer is processing
data, but the memory is full.
• Press Go to clear the
message and continue
printing.
• Press Menu to open the
Job Menu and cancel
the current job.
39 Complex
Page
The print information on the
page is too complex.
• Press Go to clear the
message and continue
printing.
• Press Menu to open the
Job Menu and cancel
the current job.
4 <x>
Unsupported
Firmware Card
The printer detects an
unsupported version of
firmware on the installed
firmware card.
• Turn the printer off and
then press and hold Go
while turning it on,
bypassing the code on
the firmware card.
• Remove the firmware
card.
Message Meaning Action
To Next Page
Loading...
