Lexmark C910 - Page 165

Diagnostic Information 2-49
5055-01X
40 Tray <x>
Size Sense
Error
The high capacity feeder
detects an error in the size
sensing mechanism.
• Turn off the printer and
be sure that all the high
capacity feeder
connectors are installed
properly.
• Check the high capacity
feeder size sensor and
go to
“Map 8 - False “40 Tray
(X) Size Sensor Error”
Message” on
page 2-62.
41 Open Bin 1
Exit Tray
The printer wants to send
paper to the bin 1 output tray,
but the tray is closed.
• Open bin 1 to clear the
message.
• Press Go to clear the
message and continue.
If the message cannot
be reset, go to
“Map 9 - False “41
Open Bin 1 Exit Tray”
Message” on
page 2-62.
51 Defective
Flash
The printer detects defective
flash memory.
• Press Go to clear the
message and continue
printing.
• Install different flash
memory before
downloading.
52 Flash Full There is not enough free
space in flash memory.
• Press Go to clear the
message and continue
printing.
• Delete fonts, macros,
and other data stored on
flash memory.
• Install flash memory with
more storage capacity.
Message Meaning Action