Lexmark C910 - Page 166

2-50 Service Manual
5055-01X
53 Unformatted
Flash
The printer detects
unformatted flash memory.
• Press Go to clear the
message and continue
printing.
• Format the flash
memory. If the error
remains, the flash
memory may be
defective.
54 Serial Option
<x> Error
The printer has detected a
serial interface error on a
serial port.
• Make sure the serial link
is set up correctly and
you are using the
appropriate cable.
• Press Go to clear the
message and continue.
• Press Menu to open the
Job Menu and reset the
printer.
54 Network <x>
Software Error
54 Standard or
Std <x>
Software Error
The printer cannot establish
communications with an
installed network port.
• Press Go to clear the
message and continue
printing.
• Program new firmware
for the network interface
by way of the parallel
port.
• Press Menu to open the
Job Menu and reset the
printer.
54 Std Par
ENA
Connection
Lost
54 Par <x> ENA
Connection
Lost
The printer has lost the
connection to an external
print server.
• Make sure the cable
connecting the ENA and
the printer is securely
attached. Turn the
printer off and then on to
reset.
• Press Go to clear the
message and continue
printing.
56 Serial Port
<x> Disabled
Data has been sent to the
printer through a disabled
serial port.
• Press Go to clear the
message.
• Make sure the Serial
Buffer menu item in the
Serial Menu is set to
Disabled.
Message Meaning Action