1-2. Child safety
and seatback.
Check the positions of the exclu-
sive fixing bars, and install the child
restraint system to the seat.
The bars are installed in the clearance
between the seat cushion and seatback.
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(oP.97)
Q Anchor brackets (for top strap)
Anchor brackets are provided for the
second outboard seat.
Use anchor brackets when fixing the
top strap.
Top strap
Anchor brackets
Q Fixing the top strap to the anchor
bracket
Install the child restraint system in
Q When installing a child restraint sys-
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
O After securing a child restraint system,
never adjust the seat.
O When using the lower anchors, be
sure that there are no foreign objects
around the anchors and that the seat
belt is not caught behind the child
restraint system.
O Follow all installation instructions pro-
vided by the child restraint system
manufacturer.
Using an anchor bracket (for top
strap)
A
B
To Next Page
Loading...
