Lexus LX600 2021 - Programming the Homelink

506
5-6. Using the other interior features
X Vehicles with Digital Rear-view
Mirror
HomeLink
®
logo
Appears while HomeLink
®
is operating.
When the menu button (oP.188) is
pressed, the logo disappears even while
the HomeLink
®
is operating.
Garage door operation indicators
HomeLink
®
indicator light
Illuminates above each button selected.
Buttons
Q Codes stored in the HomeLink
®
mem-
ory
O The registered codes are not erased
even if the battery cable is disconnected.
O If learning failed when registering a dif-
ferent code to a HomeLink
®
button that
already has a code registered to it, the
already registered code will not be
erased.
Q Before programming HomeLink
®
z During programming, it is possible
that garage doors, gates, or other
devices may operate. For this rea-
son, make sure that people and
objects are clear of the garage door
or other devices to prevent injury or
other potential harm.
z It is recommended that a new bat-
tery be placed in the remote control
transmitter for more accurate pro-
gramming.
z Garage door opener motors manu-
factured after 1995 may be
equipped with rolling code protec-
tion. If this is the case, you may need
a stepladder or other sturdy, safe
device to reach the “Learn” or
“Smart” button on the garage door
opener motor.
WARNING
Q When programming a garage door
or other remote control device
The garage door or other device may
operate, so ensure people and objects
are out of danger to prevent potential
harm.
A
B
C
D
Q Conforming to federal safety stan-
dards
Do not use the HomeLink
®
compatible
transceiver with any garage door opener
or device that lacks safety stop and
reverse features as required by federal
safety standards.
This includes any garage door that can-
not detect an interfering object. A door
or device without these features
increases the risk of death or serious
injury.
Q When operating or programming
HomeLink
®
Never allow a child to operate or play
with the HomeLink
®
buttons.
Programming the HomeLink
®