Lexus LX600 2021 - Settings Display

127
2
2-1. Instrument cluster
Vehicle status information and indicators
At this time, the Eco Driving Indicator Light
will turn off.
Zone of Eco driving
Q AdBlue™ gauge (if equipped)
Displays the quantity of AdBlue™
remaining in the tank. (oP.546)
Full
Empty
Q Eco Driving Indicator
Eco Driving Indicator will not operate
under the following conditions:
O The shift position is in any position other
than D.
O A paddle shift switch is operated.
O The driving mode is set to SPORT S
mode or SPORT S+ mode.
O The driving mode is set to custom mode
and the powertrain control is set to
power. (oP.407)
O The vehicle speed is approximately 130
km/h (80 mph) or higher.
Select to display the following naviga-
tion system-linked information.
z Route guidance to destination
z Compass display
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Select to display the operational status
of the following systems:
z LTA (Lane Tracing Assist) (if
equipped) (oP.273)
z Dynamic radar cruise control with
full-speed range (if equipped)
(oP.283)
z Dynamic radar cruise control (if
equipped) (oP.294)
z Cruise control (if equipped)
(oP.304)
Vehicle settings and the content dis-
played on the screen can be changed
by using the meter control switches.
Q Setting procedure
1
Press or of the meter con-
trol switches and select .
2
Press or of the meter con-
trol switches, select the item, and
press .
3
Press or of the meter con-
trol switches, select the desired set-
ting, and press .
Navigation system-linked dis-
play (if equipped)
D
A
B
Audio system-linked display
Driving support system informa-
tion display
Settings display