2-1. Instrument cluster
After changing the settings, press
of the meter control switches.
Q Meter display settings that can be
changed
z Language
Select to change the language displayed.
z Units
Select to change the units of measure dis-
played.
z Speedometer display
Select to set the display of the speedome-
ter to digital/analog/both digital and ana-
log.
z Drive information 1/Drive informa-
tion 2
Select to select up to 2 items (oP.125)
that will be displayed on each Drive infor-
mation screen (Drive information 1 screen
and Drive information 2 screen) respec-
tively.
z Pop-up display
Select to enable/disable pop-up displays
for each relevant system.
z Eco Driving Indicator Light
Select to enable/disable the Eco Driving
Indicator Light.
z Default setting
Select to reset the meter display settings to
the default setting.
Q Vehicle functions and settings that
can be changed
oP.637
Q Suspension of the settings display
O Some settings cannot be changed while
driving. When changing settings, park
the vehicle in a safe place.
O If a warning message is displayed, opera-
tion of the settings display will be sus-
pended.
Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,
use the meter control switches.
Q Suggestion to turn on the head-
lights
If the headlight switch is in other than
or , and the vehicle speed is 5
km/h (3 mph) or higher for a certain
amount of time when the surroundings
are dark, a suggestion message will be
displayed.
Q Cautions during setting up the dis-
play
As the engine needs to be running
during setting up the display, ensure that
the vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
Q During setting up the display
To prevent battery discharge, ensure
that the engine is running while setting up
the display features.
Suggestion function (if
equipped)