Lexus LX600 2021 - If the Vehicle Battery Is Discharged

611
7
7-2. Steps to take in an emergency
When trouble arises
If you have a set of jumper (or booster)
cables and a second vehicle with a bat-
tery, you can jump start your vehicle by
following the steps below.
1
Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and the doors locked.
(oP.109)
2
Open the hood (oP.532) and
keep the engine compartment
cover opened or removing the
cover. (oP.535)
3
Open the positive (+) battery ter-
minal cover.
4
Gasoline engine: Remove the
engine cover.
Lift the edge of the cover to disengage the
fixed pins, and then pull the cover towards
you to remove it.
5
Connect a positive jumper cable clamp to on your vehicle and connect the
clamp on the other end of the positive cable to on the second vehicle. Then,
connect a negative cable clamp to on the second vehicle and connect the
clamp at the other end of the negative cable to .
If the vehicle battery is dis-
charged
The following procedures may be
used to start the engine if the vehi-
cle’s battery is discharged.
You can also call your Lexus dealer
or a qualified repair shop.
Restarting the engine
A
B
C
D