EasyManua.ls Logo

Lexus LX600 2021 - Replacing Light Bulb

Lexus LX600 2021
690 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
570
6-3. Do-it-yourself maintenance
z Tail lights
z Stop lights
z Rear turn signal lights
z Back-up lights
z High mounted stoplight
z License plate lights
z Outer foot lights
z Running board lights
Q LED lights
The lights other than the rear fog lights (if
equipped) each consist of a number of
LEDs. If any of the LEDs burn out, take your
vehicle to your Lexus dealer to have the
light replaced.
Q Condensation build-up on the inside of
the lens
Temporary condensation build-up on the
inside of the light lens does not indicate a
malfunction. Contact your Lexus dealer for
more information in the following situations:
O Large drops of water have built up on the
inside of the lens.
O Water has built up inside the light.
Q When replacing light bulbs
oP.569
Q Rear fog lights (if equipped)
1
Turn the bulb base counterclock-
wise.
2
Remove the light bulb.
3
When installing, reverse the steps
listed.
Replacing light bulb
WARNING
Q Replacing light bulb
O Turn off the light. Do not attempt to
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
O Do not touch the glass portion of the
light bulb with bare hands. When it is
unavoidable to hold the glass portion,
use and hold with a clean dry cloth to
avoid getting moisture and oils on the
bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.

Table of Contents

Related product manuals