7-2. Steps to take in an emergency
Remove the spare wheel cover.
Chock the tires.
Slightly loosen the wheel nuts (one
turn).
Assembling the jack handle.
Remove the jack handle bar, jack handle
extension bar and wheel nut wrench from
the tool box and assemble by following
these steps.
Loosen the bolt using a wheel nut
wrench.
Assemble the jack handle bar, jack
handle extension bar and wheel nut
wrench and tighten the bolts.
Check that the bolts are firmly tightened.
Replacing a flat tire
Flat tire Wheel chock positions
Front left-
hand side
Behind the rear right-hand
side tire
Front right-
hand side
Behind the rear left-hand
side tire
Rear left-
hand side
In front of the front right-
hand side tire
Rear right-
hand side
In front of the front left-
hand side tire
To Next Page
Loading...
