4-5. Using the driving support systems
• When backing up toward the roadside or
a bump on the road
• When backing up toward an
incline/decline
• If the rear of the vehicle is raised or low-
ered due to the carried load
• If a bumper protector, such as an addi-
tional trim strip, is installed to the rear
bumper
• If the orientation of the rear camera has
been changed
• If a towing eyelet is installed to the rear of
the vehicle
• When water is flowing over the rear cam-
era lens
• When the rear camera is obscured (dirt,
snow, ice, etc. are attached) or scratched
• If there is a flashing light in the detection
area, such as the emergency flashers of
another vehicle
• When tire chains or an emergency tire
puncture repair kit are used
O Situations in which the rear camera
detection function may be difficult to
notice
• The buzzer may be difficult to hear if the
surrounding area is noisy, the volume of
the audio system volume is high, the air
conditioning system is being used, etc.
• If the temperature in the cabin is
extremely high or low, the Multimedia
Display may not operate correctly.
*
:If equipped
Q Parking Support Brake function
(Static Objects Front and Rear of
the Vehicle)
oP.339
Q Parking Support Brake function
(Moving Vehicles Rear of the
Vehicle) (if equipped)
oP.342
Q Parking Support Brake function
(Pedestrians Rear of the Vehicle)
(if equipped)
oP.344
PKSB (Parking Support
Brake)
*
The Parking Support Brake system
consists of the following functions
that operate when driving at a low
speed or backing up, such as when
parking. When the system deter-
mines that the possibility of a colli-
sion with a detected object or
pedestrian is high, a warning oper-
ates to urge the driver to take eva-
sive action. If the system
determines that the possibility of a
collision with a detected object or
pedestrian is extremely high, the
brakes are automatically applied to
help avoid the collision or help
reduce the impact of the collision.
PKSB (Parking Support Brake)
system
To Next Page
Loading...
