3-4. Adjusting the steering wheel and mirrors
*
: If equipped
Camera indicator
Indicates that the camera is operating nor-
mally.
Icon display area
Displays icons, adjusting gauge, etc.
(oP.190)
Select/adjust button
Press to change the setting of the item you
want to adjust.
Menu button
Press to display the icon display area and
select the item you want to adjust.
Lever
Operate to change between digital mirror
mode and optical mirror mode.
Operate the lever to change between
digital mirror mode and optical mirror
mode.
Digital Rear-view Mirror
*
The Digital Rear-view Mirror is a
system that uses the camera on the
rear of the vehicle and displays its
image on the display of the Digital
Rear-view Mirror.
The Digital Rear-view Mirror can
be changed between optical mirror
mode and digital mirror mode by
operating the lever.
The Digital Rear-view Mirror
allows the driver to see the rear
view despite obstructions, such as
the head restraints or luggage,
ensuring rear visibility. Also, the
rear seats are not displayed and pri-
vacy of the passengers is enhanced.
Observe the following precautions.
Failure to do so may result in death or
serious injury.
Q Before using the Digital Rear-view
Mirror
O Make sure to adjust the mirror before
driving. (oP.189)
• Change to optical mirror mode and
adjust the position of the Digital Rear-
view Mirror so that the area behind
your vehicle can be viewed properly.
• Change to digital mirror mode and
adjust the display settings.
O As the range of the image displayed by
the Digital Rear-view Mirror is differ-
ent from that of the optical mirror,
make sure to check this difference
before driving.
System components
Changing modes
A
B
C
D
E
To Next Page
Loading...
