6
6-1. Maintenance and care
Maintenance and care
z Remove dirt using a water-damp-
ened soft cloth or synthetic chamois.
z Wipe the surface with a dry soft
cloth to remove any remaining
moisture.
Q Cleaning the areas with satin-finish
metal accents
The metal areas use a layer of real metal to
the surface. It is necessary to clean them
regularly. If dirty areas are left uncleaned
for long period of time, they may be difficult
to clean.
z Remove dirt and dust using a vac-
uum cleaner.
z Wipe off any excess dirt and dust
with a soft cloth dampened with
diluted detergent.
Use a diluted water solution of approxi-
mately 5% neutral wool detergent.
z Wring out any excess water from
the cloth and thoroughly wipe off all
remaining traces of detergent.
z Wipe the surface with a dry, soft
cloth to remove any remaining
moisture. Allow the leather to dry in
a shaded and ventilated area.
Q Caring for leather areas
Lexus recommends cleaning the interior of
the vehicle at least twice a year to maintain
the quality of the vehicle’s interior.
z Remove dirt and dust using a vac-
uum cleaner.
z Wipe it off with a soft cloth damp-
ened with neutral detergent diluted
to approximately 1%.
z Wring out any excess water from
the cloth and thoroughly wipe off
remaining traces of detergent and
water.
Cleaning the areas with satin-
finish metal accents
Cleaning the leather areas
Cleaning the synthetic leather
areas
To Next Page
Loading...
