Lexus LX600 2021 - Checking the Coolant

538
6-3. Do-it-yourself maintenance
1
Press or of the meter con-
trol switches to select .
2
Press or to select “Vehicle
Settings” and then press .
3
Press or to select “Oil
Maintenance” and then press .
4
Press or to select “Yes” and
then press .
“Reset complete” will be displayed when
the reset procedure has been completed.
Q Engine coolant reservoir
The coolant level is satisfactory if it is
between the “F” and “L” lines on the
reservoir when the engine is cold.
Reservoir cap
“F” line
“L” line
If the level is on or below the “L” line, add
coolant up to the “F” line. (oP.616)
Q Intercooler coolant reservoir
The coolant level is satisfactory if it is
between the “F” and “L” lines on the
reservoir when the engine is cold.
WARNING
Q Used engine oil
O Used engine oil contains potentially
harmful contaminants which may
cause skin disorders such as inflamma-
tion and skin cancer, so care should be
taken to avoid prolonged and
repeated contact. To remove used
engine oil from your skin, wash thor-
oughly with soap and water.
O Dispose of used oil and filters only in a
safe and acceptable manner. Do not
dispose of used oil and filters in house-
hold trash, in sewers or onto the
ground. Call your Lexus dealer, ser-
vice station or auto parts store for
information concerning recycling or
disposal.
O Do not leave used engine oil within the
reach of children.
NOTICE
Q To prevent serious engine damage
Check the oil level on a regular basis.
Q When replacing the engine oil
O Be careful not to spill engine oil on the
vehicle components.
O Avoid overfilling, or the engine could
be damaged.
O Check the oil level on the dipstick
every time you refill the vehicle.
O Be sure the engine oil filler cap is prop-
erly tightened.
Q After changing the engine oil
Make sure to reset the engine oil mainte-
nance data. If it is not reset, the next
maintenance timing will not be displayed
properly.
Checking the coolant
A
B
C