Lexus LX600 2021 - Rear Seat Position Memory (4-Passenger Models); Passenger Models)

208
3-6. Favorite settings
z Memory recall function cancelation
procedure
Carry only the key you want to cancel and
then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled prop-
erly.
1
Turn the engine switch to ON.
2
While pressing the “SET” button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If the button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
Q Recalling the driving position using the
memory recall function
If a door other than the driver’s door is
unlocked with the smart entry & start sys-
tem, the driving position cannot be recalled.
In this case, press the driving position but-
ton which has been set.
Q Customization
Some functions can be customized. (Cus-
tomizable features: oP.643)
1
Turn the engine switch to ON.
2
Display the home screen on the
Rear Multi Operation Panel
(oP.449) and then select “Seat”.
3
Select “Left” or “Right”.
4
Adjust the rear seat to the desired
position and then select “SET”.
5
Select “1” or “2”.
If the preset is being used, the previously
recorded seat position will be overwritten.
Q In order to correctly use the position
memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
1
Turn the engine switch to ON.
Rear seat position memory
(4-passenger models)
The rear seat position can be mem-
orized and recalled with the touch
of a button.
Recording a position into mem-
ory
WARNING
Q Seat adjustment caution
Take care during seat adjustment so that
the rear passengers do not strike the
front seats.
Recalling the memorized posi-
tion