4
4-5. Using the driving support systems
Driving
z When the vehicle speed exceeds a
certain speed.
z When there is a malfunction in a
sensor or the system is temporarily
unavailable.
z When the operating function is dis-
abled manually.
z When the engine switch is turned
off.
*
:If equipped
RCTA (Rear Cross Traffic
Alert) function
*
The RCTA function uses the BSM
rear side radar sensors installed
behind the rear bumper. This func-
tion is intended to assist the driver
in checking areas that are not easily
visible when backing up.
Q Cautions regarding the use of the
system
There is a limit to the degree of recogni-
tion accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
always responsible for paying attention
to the vehicle’s surroundings and driving
safely. (oP.312)
Q To ensure the system can operate
properly
oP.314
To Next Page
Loading...
