EasyManua.ls Logo

Lexus LX600 2021 - Tire Pressure Warning System

Lexus LX600 2021
690 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
552
6-3. Do-it-yourself maintenance
Q When rotating the tires
Make sure that the engine switch is OFF. If
the tires are rotated while the engine switch
is in ON, the tire position information will
not be updated.
If this accidentally occurs, either turn the
engine switch to OFF and then to ON, or
initialize the system after checking that the
tire pressure is properly adjusted.
Your vehicle is equipped with a tire
pressure warning system that uses tire
pressure warning valves and transmit-
ters to detect low tire inflation pressure
before serious problems arise.
The tire pressure warning system of
this vehicle adopts a 2-type warning
system
z When “Adjust Pressure” is dis-
played (Normal Warning)
The tire pressure warning light comes on
and a buzzer sounds when the tire inflation
pressure becomes low due to natural air
leakage or outside temperature. (Ways of
coping:oP.589, 633)
z When “Immediately Check Tire
when Safe” is displayed (Emergency
Warning)
The tire pressure warning light comes on
and a buzzer sounds when the tire inflation
pressure becomes low suddenly due to a
blowout. (Ways of coping: oP.589, 597)
However, the system may not be able to
detect sudden tire ruptures (bursting, etc.).
z The tire pressure detected by the
tire pressure warning system can be
displayed on the multi-information
display.
The unit can be changed.
Q How to change the unit
1
Park the vehicle in a safe place and
turn the engine switch off.
Changing the unit cannot be performed
while the vehicle is moving.
2
Turn the engine switch to ON.
3
Press or of the meter con-
trol switches on the steering wheel
and select .
4
Press or of the meter con-
trol switches and select “Vehicle
Settings”, and then press .
5
Press or of the meter con-
trol switches and select “TPWS set-
ting”, and then press .
6
Press or of the meter con-
trol switches and select “Setting
Unit”, and then press .
7
Press or of the meter con-
trol switches and select the desired
unit, and then press .
Q Routine tire inflation pressure checks
The tire pressure warning system does not
replace routine tire inflation pressure
checks. Make sure to check tire inflation
Tire pressure warning system

Table of Contents

Related product manuals