3
3-6. Favorite settings
Before driving
Display the home screen on the
Rear Multi Operation Panel
(oP.449) and then select “Seat”.
Select “Left” or “Right”.
Press and hold “1” or “2”.
When the seat has moved to the registered
position, operation will stop.
When the operating conditions are not
met, the buttons will be grayed out.
An individual can be identified using
the following authentication devices.
z Electronic key
An individual is identified when the smart
entry & start system detects their elec-
tronic key. (oP.162)
z Fingerprint authentication system (if
equipped)
An individual is identified when they touch
the fingerprint sensor on the engine switch.
If their fingerprint has been registered in
Drivers are identified using devices
such as electronic keys to store the
driving position and vehicle settings
for each. Then the information can
be recalled the next time the vehi-
cle is driven.
Authentication devices can be
assigned in advance to drivers so
that they can drive using their pre-
ferred settings.
Settings for 3 drivers can be stored
in My Settings.
For information on authentication
devices registration/deletion,
changing the driver’s name, initial-
izing driver registered settings,
manually switching drivers and
deleting drivers registration refer
to the “Multimedia Owner’s Man-
ual”.
Types of assigned authentica-
tion devices
To Next Page
Loading...
